menu
logopatek philippe certificate
THG_IAW26_Ulysse-Nardin_Freak-S-Purple-Enamel_Cover-Image

ULYSSE NARDIN FREAK S PURPLE ENAMEL BRINGS MÉTIERS D'ART INTO MOTION

16 Nov 2026 · 10 min read

Ulysse Nardin marks two milestones in 2026: 180 years since its founding in Le Locle and 25 years since the introduction of the Freak. To commemorate both anniversaries, the Swiss manufacture presents the Freak S Purple Enamel, bringing the traditional craft of enamelling into one of its most technically complex mechanical creations.


First introduced in 2001, the Freak challenged established conventions with a watch that dispensed with traditional hands, a dial, and a crown. Conceived by Dr Ludwig Oechslin, its movement served as the mechanism for displaying time while introducing silicon into mechanical watchmaking. Over the following 25 years, the collection became a platform for experimentation in materials, escapements, and movement construction.


The Freak S Purple Enamel continues this approach through an automatic dual-oscillator movement and a rotating hour disc decorated with purple guilloché-flinqué enamel. Produced at Ulysse Nardin's Donzé Cadrans workshop, the disc brings a centuries-old decorative technique into a mechanism whose components remain in continuous motion.

A Different Way of Displaying Time
THG_IAW26_Ulysse-Nardin_Freak-S-Purple-Enamel_5
The three-dimensional architecture of the Freak S reveals its exposed mechanics within a 45mm titanium case

Introduced in 2022, the Freak S developed the original Freak concept through a three-dimensional movement architecture constructed across six distinct gear planes. Approximately 95 per cent of its components are in motion, with the mechanism itself performing the function normally assigned to conventional hands.


The watch is powered by the Manufacture Calibre UN-251, an automatic flying carousel movement comprising 373 components. The baguette-shaped movement completes one revolution every 60 minutes, with a pointer at its extremity indicating the minutes.


Beneath the carousel, a separate rotating disc completes one revolution every 12 hours to indicate the hours. In the Freak S Purple Enamel, this disc is finished in a deep purple enamel, providing a contrasting backdrop to the movement's exposed mechanical components.


The absence of a conventional crown also determines how the watch is operated. Time is adjusted by releasing the safety lock at 6 o'clock and rotating the bidirectional bezel. Manual winding is performed by turning the caseback anticlockwise, transferring energy directly to the barrel through the Grinder winding system.

Two Oscillators Working in Unison
THG_IAW26_Ulysse-Nardin_Freak-S-Purple-Enamel_2
The Freak S Purple Enamel features a flying carousel movement with two inclined silicon oscillators against a guilloché-flinqué enamel hour disc

The Freak S was the first automatic watch to incorporate two oscillators, each positioned at an inclination of 20 degrees. These oversized regulating organs feature silicon balance wheels, balance springs, and DIAMonSIL escapements. Connecting the oscillators is a vertical mechanical differential composed of 47 parts, including six ceramic ball bearings. According to Ulysse Nardin, it is the smallest vertical differential developed for a mechanical watch.


The differential continuously averages the rates of the two oscillators, helping to stabilise the movement's overall timekeeping performance. Its construction also draws on a mechanical principle dating to 1827, when French watchmaker Onésiphore Pecqueur developed the differential for early steam-powered vehicles. Silicon plays an equally important role in the movement. Ulysse Nardin pioneered the material's application in watchmaking with the original Freak in 2001, using its low friction, light weight, and resistance to magnetism to improve mechanical performance.


The Freak S Purple Enamel incorporates ten silicon components produced at Sigatec, the Manufacture's specialist facility in Sion, Switzerland. Its escapements employ DIAMonSIL, a technology patented in 2007 that applies a diamond coating to silicon to improve resistance to friction and wear. Both oscillators operate at a frequency of 2.5Hz, equivalent to 18,000 vibrations per hour each.

The Art of Purple Enamel
THG_IAW26_Ulysse-Nardin_Freak-S-Purple-Enamel_3
A close-up of the purple guilloché-flinqué enamel hour disc, crafted in-house at Ulysse Nardin’s Donzé Cadrans workshop

The defining visual element of the Freak S Purple Enamel is its guilloché-flinqué hour disc, produced entirely in-house at Donzé Cadrans. Founded in 1972 by master enameller Francis Donzé, the workshop began collaborating with Ulysse Nardin during the 1980s before being acquired by the Manufacture in 2011. Its expertise encompasses several traditional enamelling techniques, including Grand Feu, cloisonné, champlevé, and guilloché-flinqué.


For the Freak S Purple Enamel, the process begins with a disc fashioned from 18-carat white gold. The alloy is selected for its thermal stability, allowing the component to withstand repeated exposure to the high temperatures required during enamelling. Before the enamel is applied, the disc is stamped with a geometric pattern developed by Ulysse Nardin. This textured foundation creates a repeating visual rhythm beneath the translucent purple surface.


The enamel pigments are washed, ground by hand into a fine powder, and combined with water to form a paste. This mixture is applied to the disc and fired in a kiln at approximately 800°C. Between three and four layers are required to develop the desired depth and intensity of colour.


Once the firing process is complete, the surface undergoes approximately an hour of manual polishing to reveal the underlying pattern and the enamel's characteristic luminosity. The process demands particular care because the hour disc serves as an active mechanical component. Unlike a conventional stationary dial, it rotates continuously beneath the flying carousel and must maintain precise dimensional tolerances and balance.


Any distortion caused by repeated heating could compromise its mechanical function. The risk of cracking, bubbling, or uneven firing further complicates production, particularly when working with an element that must satisfy both decorative and mechanical requirements. The resulting surface introduces a different visual dimension to the Freak S, with the purple enamel providing a textured background against which the movement's twin oscillators and rotating mechanism can be observed.

The Grinder Automatic Winding System


Powering two oscillators places considerable demands on a movement's energy supply. Ulysse Nardin addresses this through its patented Grinder automatic winding system, first presented in the Freak InnoVision 2 concept watch in 2017. The system is designed to capture energy from small wrist movements, converting kinetic motion into power for the movement through an arrangement of winding blades and low-friction components.


Combined with ceramic ball bearings and the movement's relatively low operating frequency, the Grinder system provides the Freak S Purple Enamel with a power reserve of 72 hours. The entire movement is assembled from beginning to end by a single Grandes Complications watchmaker at Ulysse Nardin's manufacture in Switzerland, reflecting the specialised expertise required to construct and regulate its interconnected mechanisms.

A Study in Titanium and Colour
THG_IAW26_Ulysse-Nardin_Freak-S-Purple-Enamel_4
An angled view highlights the sculpted titanium case and unconventional construction of the Freak S Purple Enamel

The Freak S Purple Enamel is housed in a 45mm titanium case, with the bezel, locking mechanism, and caseback also constructed from the same material. Titanium is approximately 45 per cent lighter than steel while offering high strength and resistance to corrosion. Its use allows the manufacture to accommodate the movement's substantial architecture while reducing the overall weight of the watch.


The case measures 16.65mm in overall thickness, with a perceived height of 13.66mm, and offers water resistance to 30m. An open sapphire caseback provides a further view of the movement and its winding mechanism. Completing the composition is a purple calfskin leather strap with white stitching, secured by a titanium folding buckle.

25 Years of Mechanical Experimentation


The Freak S Purple Enamel reflects the continued development of a collection that has served as a testing ground for Ulysse Nardin's mechanical research since 2001. From the introduction of silicon components to the development of dual oscillators and the vertical differential, successive Freak models have explored alternative approaches to regulating and displaying time. The Freak ONE's receipt of the Iconic Watch Prize at the 2023 Grand Prix d'Horlogerie de Genève further acknowledged the collection's contribution to contemporary watchmaking.


The latest Freak S extends that research into the decorative arts. Its guilloché-flinqué hour disc requires traditional enamelling techniques to meet the demands of a continuously rotating mechanical component. A quarter of a century after the original Freak, Ulysse Nardin continues to explore the possibilities of its unconventional movement architecture, this time through the technical demands and visual qualities of enamel.

Share the story
1999 - 2026 © The Hour Glass Limited. All Rights Reserved.